NSF/ANSI/CAN 61 Compliance

Keeping You in Compliance

On January 1, 2024 the NSF/ANSI/CAN 61 Section 9 Lead Leachate Standard will become mandatory.

Be ready with our lead-free* and low-lead brass solutions

We have excellent American-made brass solutions that will ensure you comply with the current and coming standards. Our three brass options, ECO FORGE®, ECO BRASS®, and Low Lead Brass, have been successfully used for part production and are the ideal fit to keep your components compliant as we move toward 2024. These three options provide sound solutions to continue operating in compliance with NSF/ANSI/CAN 61, Section 9 lead leachate standard. Select the brass alloy that works best for the products you are manufacturing.

NSF/ANSI/CAN 61 Section 9 Requirements:

  • Mandated as of January 1, 2024
  • Reduced from 5 to 1 µg for endpoint devices (e.g. faucets)
  • Reduced from 5 to 0.5 µg for components (e.g. valves)

AVERAGE “Q” VALUES FOR DRILLED, WATER CONTACT SURFACES, EXTRAPOLATED TO 8, 20, 50 AND 120 IN2

1 to 8 (in2)

Small Components
Fittings, shut-off valves, valve cartridges, center body tees, aerator housings

9 to 20 (in2)

Large Components
Faucet bodies & faucet spouts

21 to 50 (in2)

Small Devices
Bathroom faucets

51 to 120 (in2)

Large Devices
Kitchen faucets, drinking fountain bubblers

Our experts at Wieland Chase are here to discuss your specific manufacturing needs to ensure a smooth transition to a new alloy if needed. The mechanical properties and chemical composition of these alloys will meet your product’s requirements.

Alloy Properties and Machinability

Tensile Strength (ksi) Yield Strength (ksi) Elongation (%) Mid-Radius Hardness (Rb) Dezincification Depth (µm)3 Machinability (vs C360)4
90 48 35 88 40 85
Tensile Strength (ksi) Yield Strength (ksi) Elongation (%) Mid-Radius Hardness (Rb) Dezincification Depth (µm)3 Machinability (vs C360)4
77 55 22 87 40 82
Tensile Strength (ksi) Yield Strength (ksi) Elongation (%) Mid-Radius Hardness (Rb) Dezincification Depth (µm)3 Machinability (vs C360)4
63 40 28 74 400 70

Nominal Alloy Composition (with ASTM Ranges)

Copper (%) Nominal Lead (%) Nominal Silicon (%) Nominal Phos. (%) Nominal Zinc (Approx. %) Nominal
75.3 0.05 2.9 0.1 21.5
ASTM ASTM ASTM ASTM ASTM
73-77 0.09 max 2.7-3.4 0.04-0.15 Remainder
Copper (%) Nominal Lead (%) Nominal Silicon (%) Nominal Phos. (%) Nominal Zinc (Approx. %) Nominal
68.4 0.05 1.7 0.09 29.8
ASTM ASTM ASTM ASTM ASTM
67.5 0.09 max 1.53-2.0 0.04-0.15 Remainder
Copper (%) Nominal Lead (%) Nominal Silicon (%) Nominal Phos. (%) Nominal Zinc (Approx. %) Nominal
61.6 0.18 38
ASTM ASTM ASTM ASTM ASTM
60-65 0.25 max Remainder
0
    Your Cart
    Your cart is emptyReturn to Shop